Product Group

Piston seal — Kato type

27 different sizes · ID 40 – 200 mm

Number of sizes
27
Inner diameter range
40 – 200 mm

The table below lists the sizes in this group. If you know the size you need, search within a tolerance in the size finder and request a quote directly from the results.

Size table

Dimensions are in millimetres.

Inner diameterOuter diameterHeight Material Product name
40 22 12.1 — 040X22X12.1 OHM (KATO) PISTON SEAL
45 27 12.1 — 045X27X12.1 OHM (KATO) PISTON SEAL
50 32 12.1 — 050X32X12.1 OHM (KATO) PISTON SEAL
55 37 12.1 — 055X37X12.1 OHM (KATO) PISTON SEAL
60 42 12.1 — 060X42X12.1 OHM (KATO) PISTON SEAL
65 47 12.1 — 065X47X12.1 OHM (KATO) PISTON SEAL
70 48 14.5 — 070X48X14.5 OHM (KATO) PISTON SEAL
75 53 14.5 — 075X53X14.5 OHM (KATO) PISTON SEAL
80 58 14.5 — 080X58X14.5 OHM (KATO) PISTON SEAL
85 63 14.5 — 085X63X14.5 OHM (KATO) PISTON SEAL
90 68 14.5 — 090X68X14.5 OHM (KATO) PISTON SEAL
95 73 14.5 — 095X73X14.5 OHM (KATO) PISTON SEAL
100 78 14.5 — 100X78X14.5 OHM (KATO) PISTON SEAL
110 88 14.5 — 110X88X14.5 OHM (KATO) PISTON SEAL
115 93 14.5 — 115X93X14.5 OHM (KATO) PISTON SEAL
120 98 14.5 — 120X98X14.5 OHM (KATO) PISTON SEAL
125 103 14.5 — 125X103X14.5 OHM (KATO) PISTON SEAL
130 108 14.5 — 130X108X14.5 OHM (KATO) PISTON SEAL
135 113 14.5 — 135X113X14.5 OHM (KATO) PISTON SEAL
140 118 14.5 — 140X118X14.5 OHM (KATO) PISTON SEAL
145 123 14.5 — 145X123X14.5 OHM (KATO) PISTON SEAL
150 128 14.5 — 150X128X14.5 OHM (KATO) PISTON SEAL
160 138 14.5 — 160X138X14.5 OHM (KATO) PISTON SEAL
170 148 14.5 — 170X148X14.5 OHM (KATO) PISTON SEAL
180 158 14.5 — 180X158X14.5 OHM (KATO) PISTON SEAL
190 168 14.5 — 190X168X14.5 OHM (KATO) PISTON SEAL
200 178 14.5 — 200X178X14.5 OHM (KATO) PISTON SEAL

What is a piston seal?

Piston seals separate the two chambers inside the cylinder and stop oil passing from one side to the other. This internal leak is invisible from outside; it shows up as a cylinder that cannot hold its load, creeps down slowly or fails to keep its position.

Send us your size

We can also supply sizes that are not on the list. Just send us the part's dimensions and operating conditions. See the group list for all product groups and the product catalogue for products with technical drawings.